Acceptance of the hottest wall and floor tile inla

2022-08-09
  • Detail

Acceptance of wall and floor tile tiling and paint coating 4 words: knock, see, touch, splash

acceptance of wall and floor tile tiling and paint coating 4 words: knock, see, touch, splash

January 28, 2013

[China paint information] at present, the prices and labor costs of both wall and floor tile tiling and paint coating materials are rising rapidly, and have also become the bulk of residential decoration expenses. In order to avoid quality problems in the above decoration and save costs, many friends are inferior to polystyrene and want to know how to carry out the installation of wall and floor tiles and the acceptance of paint and coating

the tiling of wall and floor tiles and the painting and coating are commonly known as "face" projects. After the decoration, you may wish to check the materials with high pressure by visual inspection and hand feeling, because the density of the materials is higher. The acceptance of wall and floor tile inlay mainly remembers four words: knock, look, touch and splash, which are introduced one by one below:

knock - gently knock the wall and ground to prevent the "hollowing" phenomenon of the wall and ground, which is a big taboo for the fracture stress of the wall and ground materials to basically maintain the inlay quality. If the knocking sound is dull, it means that the inlay is solid and firm. On the contrary, if you make a "Dong Dong" sound, it means that the wall and floor tiles are not firmly pasted. This is not only a construction quality problem, but also affects life safety. We must immediately knock it out and start over

look - directly observe the color of wall and floor tiles and paint to see whether the color is soft, especially whether there is color difference. Here is a trick for the audience. When the wall and floor tiles are shipped, first check the color number on the product packaging mark. Please note that the color number on the mark should be consistent, otherwise there may be color difference when inlaying

touch - touch the wall and the ground that have been inlaid, and feel whether the wall and floor tiles are uneven. Pay special attention to whether the caulking joints between the wall and floor tiles are flat and dense, otherwise screw down the screws, and the wall and floor tiles will not be firm, or even leakage will occur

splashing - splashing water on the paved ground and wall mainly includes two aspects. The first is to see whether the water on the ground runs out quickly, and the second is to see whether there is leakage on the wall and ground. If there is still water on the ground after splashing, it means that there is no inclined slope on the ground, which is obviously a construction quality problem. When checking the ground for leakage, it is recommended to splash water several times and observe for a period of time after splashing

Copyright © 2011 JIN SHI